E12 to E26 E27 Adapter Chandelier Light Socket E12 to Medium Socket E26 E27 Converter Bulb Base Adapter Converter

[Number of Items: 15]
Did what I needed.work wonderful

[Number of Items: 5]
I used these to get my Govee bulbs to fit in my outdoor lamp and worked perfectly.

[Number of Items: 2]
Simple, its basically just like a normal lightbulb. Screws in and works exactly as expected 👍

[Number of Items: 2]
Works as described. Cost effective.

[Number of Items: 5]
Works good with my fan outlets

[Number of Items: 5]
So I bought a ceiling fan for my bedroom with a remote control unit, and I love it. Except for one minor issue: The ceiling fan included light kit uses those much smaller E12 bulbs, and included four 40-watt bulbs for it, which feel dull in my room even though they are burning 160 watts collectively.Hey, no problem, I thought to myself, I'll just get a different light kit that accepts the normal E26 bulbs and I can go back to my bright LED normal size bulbs. So I look it up, and I can totally do it... for a minimum of $100 more. Well, call me cheap, but I had a hard time justifying that cost. I'm not a rich man.Then I basically stumbled across these. It makes sense that adapters would exist, but I had just never thought about it. And for 7% of the cost of a new light kit, I'd be able to use normal bulbs again!About the only negative I can come up with is that they do make the bulbs stick out of the glass covers. This is in my bedroom though, where it won't get a lot of attention. So they might not work in every light fixture, but for my use in a ceiling fan, they work just fine.I have four LED bulbs installed burning a collective 24 watts as opposed to the 160 from the other bulbs, and they produce more light and less heat. My remote control unit has a dimming feature and it works fine with my dimmable LED bulbs connected through these adapters.Now I'm using the LED bulbs I already had, giving me better light, and the only cost is that my fan in my bedroom looks a little bug-eyed compared to the others, but I don't take notice considering where it's located. This saved me from a $100 purchase that would have required me to do a real install. Well worth it.

[Number of Items: 15]
NOTE: The wattage and heat limits of this adapter do not replace the limits of your lamp or fixture!!!PROS:* Compact design* Decently crimped* Simple, no-solder construction* Claimed rating well above anything a candelabra base would need* Materials ratings higher than claimed ratings.* Easy warranty through AmazonCONS:* Ratings/limits not marked on the units* Seller / manufacturer solicits further sales via Amazon order updates* No US presence, so limited recourse in case of fire damageOverall, I like the product. They are low cost. The design is solid, simple, and easy to inspect.The rating says 1000W and 200C limits.* A 100W bulb operates around 120C in open air.* A 250W T10 halogen bulb operates at 257C in open air.* The socket is made of bakelite (250C max continuous)* The electrodes are made of aluminum (470C max continuous), and brass (450C max continuous).* There is no solder to melt, just two screws.So, you can run a 250W heat lamp, or a 200W T10 bulb, or most normal 1-way bulbs in this and stay within ratings, but be careful with halogen bulbs.In normal use, you will be limited by the candelabra base fixture before you will be limited by this adapter.NOTE: Look at your fixture, lamp, light kit, or whatever you plan to install this into. If that limit is lower than the limits on this, USE THE LOWER LIMIT. Just because this adapter can handle high wattage does not magically replace the wiring inside a 60W table lamp, or a 100W porch fixture.Realistically, this will most likely get used with ceiling fans or table lamps, which usually, anything more than 100W is not comfortable.I wanted to rate this poorly because of the spammy message I got, but the product exceeds my expectations based on product description, and my own "it should do this." I'm using them in a ceiling fixture, and they are working well, even with vibration.

[Number of Items: 10, Number of Items: 10]
After ordering the wrong bulbs for my ceiling fan three times in a row, I figured ordering the adapters would have to be easier than teaching my brain how to think. I was right! These have made my life so much easier - I now only have to buy one type of bulb for almost every fixture in my house, making it easy to keep extras on hand. These fit securely in the ceiling fan sockets - and bulbs are just as easy to replace in these as bulbs are to replace in regular fixtures (where you don't need these adapters). These don't put out any extraneous noise - my bed is right under my ceiling fan and since it's very still in my room when I go to bed, any noise would be easy to hear. (I can hear the ticking of a clock that's about 10 ft from my bed.) Each of the adapters works as expected and I have not noticed increased heat around these adapters (vs not using these adapters).Since I'm not mechanically inclined, I will leave the technical speak to all the reviewers who know what they're talking about. (I don't even know enough to pretend to know anything!) The only issue I can find with these? They do add additional height to your bulbs, so if your ceiling fan has globes or shades that go around/over the bulbs, that would be important to remember. Mine does have shades, but since the fan is so high it doesn't matter if the bulbs stick up past the tops of the shades a little - even my 6'9" son can't really see the added height. I love the bright light that is now thrown throughout my room, and I'm thrilled I have a wider bulb choice than I did before. The candelabra base bulbs burn out quickly, aren't as bright, and are more expensive. If the bulbs all went out right now, I would still save money over buying the candelabra bulbs.The price for these adapters is awesome! I paid barely over $1/adapter, including shipping. Schwing! Even with the small added expense of these adapters, I still came out cheaper than having to purchase the candelabra bulbs. If the cost is spread out over time, these wind up saving me money. Gotta love that! I have spent some time trying to think of one reason I dislike these bulbs, but I am unable to come up with anything. They are a simple gadget that improves life - and I couldn't be happier. I have posted a photo so you can see that the additional height doesn't really affect what can be seen when they are installed in a ceiling fan. (It was a last minute picture - please ignore the dust!) I hope you now have enough information to decide if these are right for you. They are great adapters and I am happy I purchased them.