Modern Black Semi Flush Mount Ceiling Light Fixture

[Number of Items: 1]
It was easy to install and suits my needs.

[Number of Items: 1]
Beautiful and lights well.

[Number of Items: 1]
Just as stylish and half the price of the big box stores. Very modern look, which you can change significantly, depending on which bulbs you put in it. I went with some 4000 K clear bulbs that are dimmable. That way and can change the look of the room whenever I want.Installation was simple, and all the required pieces were included.Modernize your foyer or entryway with this lovely farmhouse light.

[Number of Items: 1]
I put this in my kitchen about a month ago and it looks way better than the price tag suggests. The geometric frame design gives off that industrial vibe without being too over the top. Installation took me around 45 minutes working alone and the instructions were clear enough to follow without issue. The metal frame feels solid and the matte black finish is clean, no cheap looking gloss or parts that feel flimsy. I'm using dimmable LED bulbs and the dimmer compatibility works perfectly for setting the mood during dinner. The light output with all four bulbs is more than enough to cover my space. Only thing to note is you need to buy bulbs separately but that's standard for most fixtures. For 50 bucks this thing punches above its weight and I'd grab another one for my entryway if I needed it. Only complaint is that it was a bit challenging to get the light perfectly level.

[Number of Items: 1, Number of Items: 1]
This ceiling light is really nice and such a great price for the quality. It feels sturdy and well made, and the design looks modern and clean without being too bulky. Once installed, it gives off great light and really enhances the space.It looks much more expensive than it is and works perfectly for an entryway, hallway, or room that needs a stylish but functional light. I’m very happy with this purchase and would definitely recommend it.

[Number of Items: 1]
Love it, easy to installed, good price

[Number of Items: 1]
This is a beautiful, modern block semi-plush ceiling light, approximately 17 inches in size, featuring four E26 light bulbs. It can be used in the dining room, living room, entranceway, or hallway.As a canopy to enclose the lights a bit. Installation is easy, but it requires an installation plate that is currently attached to the back plate, and the installation location is specified for the type. It has two wings. Before doing any electrical work is important to turn off the power.First, locate the circuit breaker control panel box, which is typically located in the basement or garage, depending on the circumstances. Turn off the appropriate circuit breaker or breakers to the junction box you plan to work on. The wires in the junction box you’re going to work on must be deenergized before you begin. Once you believe you have turned off the correct breakers, go to the junction box with a voltage meter or electrical testing device and test each wire and the junction box to ensure that it is no longer energized.Next, this assemble the install plate from the package that comes in as sitting inside of the fixture cover, take it out and take the three wires from the house service, which are 14 gauge wire and thread them through the hole in the center of the install plate next take the two machine screws that are along and screw the install plate tightly into the US standard junction box Make sure the junction boxes well installed into a wooden or aluminum stud. And doesn’t wiggle, if it wiggles, that may prove that it’s loose.Makes certain that the house service wise have the last half inch or so of wire stripped from the end of the wires take the black white and round wire from the lighting fixture and one at a time set them parallel to the end of the house service wire and apply the wire lock nut to those two parallel wires Turning them clockwise until they tighten the house service wire is 14 gauge wire. The fixture wire is likely 18- or 20-gauge wire in a multi-strand configuration. The wire lock nut will screw onto the 14-gauge wire and twist the 20-gauge fixture wire tightly around it, creating a firm electrical connection. Repeat the same process with the other two sets of wires, remembering that the green wire from the house is the ground wire, which will be connected to the bare wire from the fixture.After you’ve done this, place the lighting fixture base onto the light. After you’ve connected the lighting fixture to the base, it is then connected to the installation plate with the two screws. The square box that the lighting fixture sits in should be assembled before proceeding with any electrical installation. Next, acquire E 26 light bulbs.Depending upon your decorating taste and your lighting needs for the location you’ve selected it whether this light is for a dining room or living room or hallway that will probably have some effect on the type of bulbs that you acquire and the type of switch patterns that you wish to have for fixtures of this nature, I always recommend That you get a light switch that has a dimming cap capability. You also want to ensure that the light bulbs you require for the four E26 sockets in this fixture are the type that can be dimmed; some light bulbs do not respond well to dimming. They start to flutter as the power goes down to 10 or 20% of normal.Install the lightbulbs and turn the power back on. Ensure the dimmer switches are turned on, and your fixture is properly installed.This fixture will enhance your dining room, kitchen, hallway, or another area of your home.